COPAL PRODUCTS 20 YEARS OF EXCELLENCE !

CONTINUATION OF THE INSTALLATION OF COPAL HEATING CABLE :
STEP BY STEP

Installation finished.
Staple the wire each four feet to ensure that the cable will stay in place.





Install the sensor between two heating cable near the thermostat.

Insert the cold lead and the sensor  in the wall up to the junction box with the help of your rop installed before.

Installation finished, protect the wire with a standard metal plate.

Cold lead metallic ground
Unsheathe  3 or 4 inches of the metallic ground of the cold lead with something pointed and fix it to the screw of the metal junction box.

Resistance test must be done with a multimeter.

It's not an obligation but the utilisation of self-nivelling concrete is recommended .
The installation of the ceramic will be more easy.
It will nivell your floor.
There is less chance of accidentally nicking the cable with the
trowel. It is much easier to ensure the tiles are layed level.
It protect the cable.

The COPAL cable is very small so it need a thin lay of self-nivelling concrete : 1/8pouce(3mm)

If you have any questions ,please feel free to contact us

info@copal.ca

BACK | HOME | NEXT Products | Cable Description| Thermostat| Cable Installation| Selection of Cable| Distributors, Contacts and Autorized stores| Heating Panels| Heatwave| 

COPAL CANADA LTÉE

65 Daoust
ST-EUSTACHE
1-866-243-2330
450-473-2330
Opening time : Monday to friday 7H30 to 16H00

Map

QC.CANADA